Here is the Step by Step Procedure to install Canon MG3570 Wireless Printer without USB Cable.

You must have:

1 Canon MG3570 Wireless Printer

1 Canon MG3570 CD Driver or Download driver -->Click Here-Just Skip AD at upper right of the page.

1 AP Wireless Router atleast 54mbps

1 Notebook/Laptop PC (optional)

1 or more Desktop PC where driver to be installed.

Option 1 : Using Desktop PC (if you want to install on Notebook PC proceed to Option 2 below)

Step 1. Make sure your PC LAN Cable is connected to a router with WIFI.

Step 2. Open the driver you downloaded or Insert CD Driver to DVD/CD Rom & Run MsSetup4.exe 

Step 3.  Start Set Up.>> Click Wireless Connection

Step 4. Let's go to printer first. Turn on your MG3570 Printer and wait until the green light (power) stops blinking.

Step 5. Now Hold down the Wi-Fi button on the printer until the (orange) Alarm lamp(below the power led) flashes 2 times, then release the Wi-Fi button after the second flash. Make sure that the (blue) Wi-Fi lamp  flashes quickly and the (green) POWER lamp is lit and not blinking.

Step 6. Let's go back to the Desktop  PC.

Step 7. click Connect to the Network >>> Cableless Setup >>> click Next >>> click Next >>> and answer all the following procedures and wait the program/driver to be installed.

Step 8. (Optional) If you want to install also in other PC Just Open the driver you downloaded or Insert CD Driver to DVD/CD Rom & Run MsSetup4.exe and follow Step 3 and Step 7.

Option 2 : Using Notebook PC

Step 1. Connect Your Notebook PC to Router VIA WIFI.

Step 2. Open the driver you downloaded or Insert CD Driver to DVD/CD Rom & Run MsSetup4.exe 

Step 3.  Start Set Up.>> Click Wireless Connection

Step 4. Let's go to printer first. Turn on your MG3570 Printer and wait until the green light (power) stops blinking.

Step 5. Now Hold down the Wi-Fi button on the printer until the (orange) Alarm lamp(below the power led) flashes 2 times, then release the Wi-Fi button after the second flash. Make sure that the (blue) Wi-Fi lamp  flashes quickly and the (green) POWER lamp is lit and not blinking.

Step 6. Let's go back to the notebook PC.

Step 7. click Connect to the Network >>> Cableless Setup >>> click Next >>> click Next >>> and answer all the following procedures and wait the program/driver to be installed.

Step 8. (Optional) If you want to install also in other PC Just Open the driver you downloaded or Insert CD Driver to DVD/CD Rom & Run MsSetup4.exe and follow Step 3 and Step 7.

Leave a comment when you successfully installed your printer. :) thanks. Enjoy.